According to the production processing order or design drawings, go to the rock plate market to select the rock plate materials that meet the requirements of the production processing order or design. The fewer times the texture pattern of rock plate material is repeated, the greater the decorative effect will be, and it will be more artistic and decorative, approaching the texture effect of natural stone.

Planned materials to be purchased. What kind of board is used to complete that area? How are the dimensions divided? How is the texture of the board better? Is it cut according to the texture?

Use dedicated layout software or AutoCAD to layout the sheet metal according to the production processing order or design drawing, and send the final layout effect to the customer for confirmation. The bridge cutting machine needs to layout the drawings. During the process of cutting the plates, the operator must not change the layout drawings or the cutting plates at will; otherwise, it will affect the final installation effect of the plates, or lead to poor cutting effect of the plates or the scrapping of the already cut plates.

To reduce damage to rock plates during handling and transportation, most rock plate manufacturers use five-axis machining centers to cut the plates. The greatest advantage of the five-axis bridge cutting machine is that it can not only complete the cutting of rock plates but also carry out secondary processing of products, which is something that ordinary bridge cutting machines cannot achieve.

The rock plates cut on the machine must be rinsed clean with water. If the surface of the slab adheres to the slab particles produced during the cutting process, when two slabs are assembled, due to the gap between the slabs, the slabs are very likely to break. After cleaning, use a rubber scraper or a clean cloth to remove the moisture from the surface of the sintered stone slab.

The processing personnel inspect the finished products. Check the length and width of the product; Whether the shape or edge shape of the secondary processed special-shaped plate meets the requirements of the production processing sheet. Product inspectors inspect the processed products, with a focus on checking whether the texture of the chopping board meets the requirements of the layout plan.